Вега Абсолют
Converter Vega TP-11
Return to catalog
The TP-11 converter is designed for reading data from devices with 4-20 mA interface with subsequent accumulation and transfer of this information to the LoRaWAN® network.
The battery for the converter is an irreplaceable battery, designed for a lifetime of up to 10 years. With battery power, the converter operates as Class A LoRaWAN® device. The converter can operate from an external power source with a voltage of 10...36 V.
In that case, the converter operates as Class C device.In addition, the TP-11 converter has two security inputs that trigger the alarm message to the LoRaWAN® network and two open-drain outputs for the external devices control.
Specification
Documentation
Software
Delivery set
- 4-20 mA current loop interface
- 1
- Current measurement accuracy
- ±1.2%
- Security inputs
- 2
- Open-drain outputs
- 2
- USB-port
- mini-USB, type B
- Operating temperatures, °С
- -40…+85
- Built-in temperature sensor
- Yes
- LoRaWAN® class depending on the presence of an external power supply
- A or C
- Number of LoRaWAN® channels
- 16
- Frequency plan
- EU-868, RU-868
- Ability to set a custom frequency plan
- Yes (based on EU868)
- Activation type
- ABP or OTAA
- Communication period
- 5, 15, 30 min, 1, 6, 12 or 24 h
- Antenna connector type
- SMA
- Sensitivity, dBm
- -138
- Radio coverage within line of sight, km
- up to 15
- Radio coverage in restrained urban conditions, km
- up to 5
- Transmitter power by default, mW
- 25 (configurable)
- Battery capacity, mAh
- 6400
- External supply voltage, V
- 9...36
- 4-20 mA interface supply voltage, V
- 24
- Device dimensions, mm
- 95 х 78 х 65
- Ingress protection rating
- IP65
- Mounting
- clamp fastening to the support, DIN-rail, wall-mounting
- Package dimensions, mm
- 140 х 80 х 85
- Weight of the package kit, kg
- 0.270
- Saving undelivered packets in the memory (up to 200 entries)
- Time referencing of readings by internal clock
- ADR support (Adaptive Data Rate)
- Sending of confirmed packets (configurable)
- Two operating modes «Active» and «Storage»
- Extra communication in case of security inputs actuation
- Charge measuring of the built-in battery
- Alignment via USB interface with Vega LoRaWAN Configurator application
You can download all necessary documentation by the link.
You can download all necessary software by the link.
| Converter Vega TP-11 ........................................................ | 1 pc. |
| Antenna .................................................................................. |
1 pc. |
| Screw 3х16 ............................................................................ | 4 pcs. |
| Factory Certificate ............................................................... |
1 pc. |